Het bericht Meet Mavitec at Exhibitions in 2026 verscheen eerst op Mavitec Green Energy.
]]>Below is an overview of the exhibitions where you can meet us in the coming months. We look forward to reconnecting with customers, meeting partners, and exchanging ideas with professionals across the industry.
Where to meet us
-
25–26 March | ACI Gasification – Berlin, Germany
-
8–9 July | The World Biogas Expo – Birmingham, United Kingdom
Let’s connect
Will you be attending one of these events? Feel free to send us a message in advance to schedule a meeting, or stop by our stand for a chat. We’d be happy to discuss your challenges, share our latest developments and explore opportunities together
Het bericht Meet Mavitec at Exhibitions in 2026 verscheen eerst op Mavitec Green Energy.
]]>Het bericht Roadshow V3 on Tour: A full week of testing across Eastern Europe verscheen eerst op Mavitec Green Energy.
]]>Four Sites in Four Days – The Paddle Depacker V3 on the Road
After its successful introduction in Spain and Portugal, the mobile Paddle Depacker V3 continued its route through Europe. Recently, the roadshow visited four different companies in Eastern Europe for four consecutive days of on-site testing. Each location presented its own materials, market conditions and expectations, providing a clear view of how the V3 performs in practice with reliable, high-quality output. The objective was straightforward: demonstrate the quality of the results directly on site.
Day 1 – Existing customer explores upgrade for higher capacity
The first visit was to a long-term Mavitec customer currently operating a Paddle Depacker Model S with a capacity of 1–5 m³ of material per hour. With increasing material volumes and the need for higher throughput, the on-site test with the Roadshow V3 offered valuable insight into the next step. The results showed the same familiar depackaging concept, but now with significantly higher capacity: 15–30 m³ of material per hour*, while maintaining the consistently high output quality the customer is accustomed to. Based on these test results, the customer expressed clear interest in upgrading to a larger model in the near future.
Days 2–4 – New prospects testing their own challenging materials
The following days focused on potential new customers. Each company tested a different mix of input materials, ranging from organic household waste streams and supermarket returns to mono-streams, factory rejects, and other general food waste. Across all three visits, the V3 produced a clean organic soup with purity levels of up to 99.7%. This consistent output quality gave each company a clear picture of how their materials can be processed on site, and the teams were clearly impressed by the reliability of the results.
Applicable to a broad range of industries – all aiming to improve depackaging performance
The test week highlighted another core strength of the Roadshow V3: its verstatility across different sectors. The companies involved represented industries where clean organic output and reliable depackaging are essential, including:
- Biogas plants aiming to improve input quality and increase yields
- Agricultural operators processing organic material streams
- Waste and recycling companies seeking dependable depackaging technology
- Food producers and retailers evaluating solutions for returned or off-spec products
Despite the differences in materials and challenges at each site, the mobile Paddle Depacker V3 demonstrated stable performance with consistently high-quality output across all tests.
Supported by our local partner
Throughout the week, the Roadshow was supported by our local partner Elkoplast, who provided logistical coordination, local market expertise, and on-site technical assistance. Their involvement allowed customers to ask questions in their own language and receive immediate guidance during the tests.
The purpose of the Roadshow: testing the customer’s own material
The Roadshow V3 is designed to demonstrate performance under real conditions: at your location, with your own materials, and with the same high-quality output delivered at sites across Europe. This approach gives customers clear understanding of how the V3 handles their specific streams before making an investment.
Interested in testing your own material?
Our Roadshow V3 truck can visit your site for a live demonstration. Contact our team to learn more about the possibilities, or visit our verhuur pagina to explore our range of testing machines.
Het bericht Roadshow V3 on Tour: A full week of testing across Eastern Europe verscheen eerst op Mavitec Green Energy.
]]>Het bericht The Future of Food Waste Recycling Arrives in Italy verscheen eerst op Mavitec Green Energy.
]]>We are excited to introduce the Paddle Depacker 2.0 in Italy, our durable and efficient system for separating packaging from organic material. This next-generation machine, already proven across Europe and beyond, is designed to help Italian companies address the growing challenges of food waste recycling with reliability and high performance.
With more than 300 projects delivered worldwide, we provide solutions ranging from compact food waste lines to complete turnkey installations. The Paddle Depacker 2.0 can be applied as a stand-alone unit or as part of a full food waste recycling line, even when input streams are highly contaminated. For those who would like to see it in operation, our Roadshow Paddle Depacker truck is now also available in Italy, offering the opportunity to experience its performance live.
Food Waste Challenges in Italy
With growing demand for solutions that contribute to a circular economy, food waste management is becoming an increasingly urgent priority in Italy. A central focus is the treatment of FOR.S.U. (the organic fraction of municipal solid waste), where efficiency and high-quality output are key to meeting both national requirements and EU recycling goals.
With the Paddle Depacker 2.0, operators in Italy now have access to advanced recycling technology that delivers maximum recovery of organics and clean separation of packaging, providing a practical and future-proof response to these challenges.
About the Paddle Depacker 2.0
The Paddle Depacker 2.0 combines robust engineering with reliable operation. Key features include:
-
Extra strong design for long-term durability
-
Reinforced paddles for efficient separation
-
High separation efficiency (>99.7% clean organic output)
-
Flexibility to process a wide range of food waste streams
-
High-value output: organic fraction suitable for biogas, animal feed, or compost
-
Smart, energy-efficient design with easy maintenance
These features make it a versatile solution for municipalities, waste processors, and recycling companies that want to turn food waste into valuable resources.
Proven Performance in Italy
The Paddle Depacker 2.0 has already shown its value in the Italian market. After a successful installation at VOMM Italy, the system was also adopted by EnErgon, proving its suitability for FOR.S.U. treatment and its role in supporting local recycling initiatives.
Partnership in Italy
We are proud to work together with our trusted Italian representative Spalla Off Mecc SRL to bring advanced recycling solutions to local operators. With the launch of the Paddle Depacker 2.0, this partnership takes another step forward in delivering innovative food waste recycling solutions in Italy.
“We are pleased to extend our collaboration with Mavitec by introducing the Paddle Depacker 2.0 to Italy,” says Luca Pugliese, Sales & Project Manager at Spalla Off Mecc SRL. “This machine provides companies with a reliable and efficient way to process food waste and FOR.S.U., meeting strict environmental standards while creating value from organic material.”
See the Paddle Depacker 2.0 at Ecomondo
From 3–7 November 2025, Mavitec will be present at Ecomondo in Rimini, showcasing the Paddle Depacker 2.0. Visit our stand to learn more about how the system works and discover its advantages for your process. Would you like to visit? Free tickets are available via marketing@mavitec.com. We are looking forward to meeting you there!
Het bericht The Future of Food Waste Recycling Arrives in Italy verscheen eerst op Mavitec Green Energy.
]]>Het bericht Cleaner outputs, Lower operating costs: Paddle Washer & Grit Cyclone in action across Europe verscheen eerst op Mavitec Green Energy.
]]>Cleaner plastics, higher recovery
Building on the proven separation of the Paddle Depacker, the Paddle Washer takes the plastic fraction to the next level. By thoroughly washing the plastics, the output becomes cleaner and drier, ready to meet stricter standards. At the same time, integrating the Paddle Washer enables the use of smaller screens in the Depacker, resulting in a finer, cleaner organic soup with higher recovery rates.
The outcome: plastics that are easier to recycle and organics that are simpler and more efficient to process.
See the Paddle Washer in action: delivering cleaner, drier plastics.
Protecting equipment, refining organics
The Grit Cyclone takes efficiency one step further, separating abrasive particles such as shells, glass, and stones from the organic fraction. This prevents pump wear, reduces maintenance downtime, and guarantees safer daily operation. Developed in close cooperation with customers and based on extensive on-site testing, the Grit Cyclone has been continuously refined for even greater reliability in daily operation.
See how the Grit Cyclone removes grit and protects downstream equipment
Proven impact across Europe
Operators using Mavitec’s solutions report significant cost savings and sustainability gains:
- Lower disposal volumes and operating costs
- Cleaner, drier plastics meeting higher recycling standards
- Higher recovery of valuable organics for biogas/compost production
- Less pump wear and fewer equipment breakdowns
- Fast return on investment
Discover our solutions at Pollutec 2025
At Pollutec 2025 in Lyon, Mavitec Green Energy will present the Paddle Depacker 2.0. Alongside, visitors can discover how the Paddle Washer and Grit Cyclone complement the Depacker to maximize recovery, reduce costs, and deliver the cleanest possible outputs.
Visit us in Hall H04 – Stand H091
For entry tickets: marketing@mavitec.com
To book a meeting with one of our specialists: sales@mavitec.com
We look forward to welcoming you at Pollutec 2025 and showing how Mavitec’s solutions can support tomorrow’s depackaging and recycling challenges.
Het bericht Cleaner outputs, Lower operating costs: Paddle Washer & Grit Cyclone in action across Europe verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec Green Energy presents the Roadshow V3: the latest mobile Paddle Depacker unit verscheen eerst op Mavitec Green Energy.
]]>Independent and flexible operation
Equipped with a built-in generator, the V3 removes the need for external power. The Paddle Depacker 2.0 is mounted directly on the trailer, creating a fully self-sufficient system that is easy to transport and quick to deploy. Within 30 minutes the unit can be up and running, requiring only liquid for operation. It is available for rentals across Europe.
High capacity and clean organic output
Capable of processing up to 30 m³ (eq. 12-15ton) of material per hour, the V3 is designed for high efficiency. The system includes a 4 m³ twin screw hopper, the Paddle Depacker 2.0, and multiple discharge options for the processing of wet via the newly installed piston pump and the discharge of dry organic fractions via the conveyor in the bottom of the truck. It is also equipped with a small transfer conveyor for easy discharge for the packaging fraction into a container. Operation is managed through a digital touchscreen control panel, while the unit delivers an organic output purity above 99.7%, making it highly suitable for biogas plants, compost and animal feed ingredient preparation.
‘’With the Roadshow V3, we give our customers the opportunity to test their own material on site, without being dependent on local infrastructure. It is a powerful demonstration of the Paddle Depacker’s performance and a practical way to provide flexible, customer-focused solutions.’’
— Koen van Veldhuisen, Manager Sales
Official debut at Gas Renovable 2025
After successful pre-launch demonstrations where clients already benefitted from its performance, the Roadshow V3 will make its first public appearance at Gas Renovable in Valladolid, Spain, on October 1–2, 2025 (stand 221). Visitors can see the new unit up close, explore its compact design, and learn more about its industry-leading output purity of 99.7%.
Demonstration and rental options
After the exhibition, the Roadshow V3 will be available for rental. Customers can use the system to test their own material, assess performance with specific feedstocks, compare results for biogas production, and train their operators. The Roadshow is suitable for a wide range of projects, from pilot initiatives to large-scale trials.
In addition, Mavitec Green Energy has expanded its rental fleet with extra machines to meet the growing demand across Europe. This enables faster and broader support and ensures that customers receive the right equipment at the right time.
Ready to experience the Roadshow V3?
Contact our team to book a demonstration with your own material or visit our verhuur pagina to explore all available options.
Het bericht Mavitec Green Energy presents the Roadshow V3: the latest mobile Paddle Depacker unit verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec Newsletter – Spring/Summer 2025 edition now available verscheen eerst op Mavitec Green Energy.
]]>- Nieuwe productiefaciliteit in India
Onze nieuwe vestiging in Coimbatore is nu volledig operationeel en maakt snellere productie en gelokaliseerde service op maat van de Indiase markt mogelijk. - Uitbreiding in Noord-Amerika
Twee nieuwe magazijnen in Charleston, SC en Salt Lake City, UT verbeteren de toegang tot reserveonderdelen en technische ondersteuning voor onze klanten in de VS en Canada. - Een van Europa's grootste destructiebedrijven nadert voltooiing
Een mijlpaalproject dat onze expertise in energie-efficiëntie, duurzaamheid en prestaties op lange termijn aantoont. - Energiebesparende technologieën en procesbesturing
Ontdek hoe onze oplossingen zoals het Pressurized Condensate Return System (PCRS) en WinCC Unified de efficiëntie verbeteren en de operationele kosten verlagen. - Groeiende roadshow- en verhuurvloot
Meer demo-units, meer flexibiliteit. Ervaar onze Paddle Depacker en andere systemen direct op uw locatie. - Nieuwe partnerschappen en wereldwijde aanwezigheid op beurzen
Van strategische samenwerking met PRM Waste Systems in het Verenigd Koninkrijk tot deelname aan belangrijke handelsbeurzen over de hele wereld.
Deze ontwikkelingen weerspiegelen onze voortdurende toewijding aan het leveren van slimme, betrouwbare oplossingen in Weergave, Vergassingen Groene energie met een sterke focus op praktische waarde en duurzame impact.
Lees de volledige nieuwsbrief hier: Mavitec Nieuwsbrief voorjaar-zomer 2025
Wil je op de hoogte blijven? Meld je aan voor onze nieuwsbrief!
Het bericht Mavitec Newsletter – Spring/Summer 2025 edition now available verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec featured in Zakenblad Insights: Focus on partnership with Renewi verscheen eerst op Mavitec Green Energy.
]]>In dit interview deelt onze CEO Maco van Heumen inzichten in de succesvolle en langdurige samenwerking tussen Mavitec Green Energy en Renewi. Het artikel laat zien hoe beide bedrijven nauw samenwerken om complexe voedselafvalstromen om te zetten in schone, waardevolle output - klaar voor gebruik bij de productie van biogas en biodiesel.
Een recent voorbeeld is de installatie van vier Paddle Depackers bij Renewi Organics Amsterdam, een kant-en-klare oplossing die tot 60 ton voedselafval per uur kan verwerken. Het project laat zien hoe echte samenwerking - tussen teams, afdelingen en disciplines - leidt tot slimme en effectieve oplossingen.
"Om tot de beste totaaloplossing te komen, is er een uitwisseling van kennis en ervaring tussen ons bedrijf en de mensen van Renewi," zegt Maco van Heumen.
Lees het volledige artikel hier om meer te weten te komen over de samenwerking tussen Mavitec Green Energy en Renewi, en hoe gezamenlijke expertise bijdraagt aan innovatieve oplossingen voor de verwerking van voedselafval.
Wilt u meer weten over onze depackaging systemen of de mogelijkheden tot samenwerking? Voel je vrij om neem contact op met ons team of verken onze oplossingen voor de verwerking van organisch afval.
Het bericht Mavitec featured in Zakenblad Insights: Focus on partnership with Renewi verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec Green Energy Expands Presence in the UK verscheen eerst op Mavitec Green Energy.
]]>We zijn verheugd te kunnen aankondigen dat PRM Waste Systems Ltd nu de exclusieve vertegenwoordiger van Mavitec in het Verenigd Koninkrijk is. Met meer dan 25 jaar ervaring in afvalverwerking en recycling is PRM de ideale partner om lokale ondersteuning en toonaangevende oplossingen te bieden.
Sterkere ondersteuning voor Britse klanten
PRM Waste Systems zal de geavanceerde verwerkingsoplossingen van Mavitec Green Energy vertegenwoordigen, waaronder de Paddle Depacker, Paddle Washeren andere innovatieve systemen die ontworpen zijn om organische bijproducten efficiënt te scheiden van verpakkingen.
Dit partnerschap heeft verschillende voordelen voor de Britse markt, waaronder:
- De hoogste scheidingsefficiëntie op de markt
- Bewezen technologie met korte terugverdientijd
- Efficiënte oplossingen voor organische bijproducten, voedselafval en verpakkingsafval
Toegewijd aan innovatie en efficiëntie
We waarderen de samenwerking die we tot nu toe in het Verenigd Koninkrijk hebben gehad en blijven toegewijd aan het leveren van de beste oplossingen voor afvalverwerking. Samen met PRM kijken we ernaar uit om onze ondersteuning voor de Britse markt te versterken en bedrijven te helpen hun organische afvalstromen te optimaliseren.
Neem voor meer informatie over onze oplossingen in het Verenigd Koninkrijk contact op met PRM Waste Systems Ltd:
PRM Afvalsystemen Ltd - Tony Gardner
+44 (0) 1823 665541
info@prmwastesystems.com
www.prmwastesystems.com
Het bericht Mavitec Green Energy Expands Presence in the UK verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec Expands Further in the USA verscheen eerst op Mavitec Green Energy.
]]>Ons team versterkt met VP Sales Manager Rutger Zweers
Om deze groei te ondersteunen, zijn we verheugd om Rutger Zweers te introduceren als onze nieuwe VP Sales Manager, gevestigd in de VS. Met meer dan 25 jaar ervaring in de afval- en recyclingindustrie brengt Rutger uitgebreide wereldwijde expertise en een diepgaand begrip van op maat gemaakte systemen met zich mee. Hij heeft twee decennia op de Noord-Amerikaanse markt gewerkt en is perfect gepositioneerd om de missie van Mavitec verder te brengen.
Rutger staat bekend om zijn coöperatieve aanpak en is toegewijd aan het leveren van oplossingen op maat die de efficiëntie maximaliseren en resultaten opleveren. Hij ondersteunt graag Mavitec's missie om voedselverpakkings- en recyclingsystemen van hoge kwaliteit te leveren.
Ontmoet Mavitec op de US Composting Conference in Phoenix
Wilt u Rutger ontmoeten en meer weten over onze oplossingen? Bezoek ons op de Amerikaanse compostconferentie (USCC) in Phoenix van 27-30 januari, waar we onze voedselverpakkingssystemen zullen tonen. Kom langs bij stand 1022 om te ontdekken hoe Mavitec uw activiteiten kan optimaliseren.
Verbeterde ondersteuning met lokaal kantoor en magazijn in de VS
Om onze klanten in Noord-Amerika beter van dienst te kunnen zijn, is Mavitec van plan een lokaal kantoor en magazijn te openen. Deze uitbreiding zorgt voor snellere toegang tot service, ondersteuning en reserveonderdelen, zodat we efficiënter aan uw behoeften kunnen voldoen. Blijf op de hoogte van updates terwijl we deze visie tot leven brengen.
Meer informatie over onze oplossingen voor voedselverpakking
Ontdek hoe de innovatieve oplossingen van Mavitec uw bedrijfsvoering kunnen revolutioneren. Wilt u meer weten over de Paddle Depacker 2.0 of onze plannen voor uitbreiding in Noord-Amerika? Bekijk de pagina's met gedetailleerde oplossingen of neem contact met ons op voor persoonlijk advies.
Het bericht Mavitec Expands Further in the USA verscheen eerst op Mavitec Green Energy.
]]>Het bericht Mavitec’s 2025 Exhibition Calendar: Meet Us Worldwide verscheen eerst op Mavitec Green Energy.
]]>
27-30 januari | COMPOST2025 - Phoenix, Arizona
5-6 februari | Bio360 Expo - Nantes, Frankrijk
28-30 april | BIOGAS AMERICAS - Denver, Colorado
5-8 mei | AfvalExpo - Las Vegas, Nevada
15-17 mei | IFAT Eurasia - Istanbul, Turkije
9-10 juli | Wereld Biogas Expo - Birmingham, Verenigd Koninkrijk
1-2 oktober | Salon del Gas Renovable - Valladolid, Spanje
7-10 oktober | Pollutec - Lyon, Frankrijk
14-16 oktober | Poleco - Poznan, Polen
4-7 november | Ecomondo - Rimini, Italië
We ontmoeten graag partners, klanten en iedereen die meer wil weten over hoe de oplossingen van Mavitec waarde kunnen toevoegen aan uw bedrijf.
Ga je naar een van deze tentoonstellingen?
Kom zeker langs bij onze stands! Of je nu vragen hebt, mogelijkheden wilt verkennen of gewoon even gedag wilt zeggen, we zien je daar graag. Laten we van 2025 een jaar van zinvolle samenwerkingen maken!
Het bericht Mavitec’s 2025 Exhibition Calendar: Meet Us Worldwide verscheen eerst op Mavitec Green Energy.
]]>